Case CX145C SR, CX235C SR Minimum-Swing Radius Excavators Meet Tier IV Interim Standards | Brass Lock Nut

The sum of the parts is shorter cycle times, less rework, fewer overcorrections, greater precision for lift and placement, higher breakout forces and improvements in fuel economy of up to 14 percent.

Among them are two Michigan brothers, Rick and Marty Lagina, who a decade ago invested in the mile-long piece of land off the coast of Nova Scotia and began to paw through its soil. In 2014, the History Channel joined them, documenting their search in a reality TV show called “The Curse of Oak Island.”

“We were extracting stumps with the excavator bucket,” recalled Brian Thompson, who co-owns the company with his brother Brandon. “That left big holes and it took a tremendous amount of time to burn.”

ROUND ONE: Dawodu is an inch taller and has three and a half inches of reach on Bochniak. Bochniak doing some stance switching and circling around Dawodu. Leg kick from Dawodu. Bochniak avoids a bunch of flashy stuff and lands a leg kick. They trade some leg kciks, neither man has landed much with the fists yet. Bochniak lands a right then another leg kick. Dawodu is digging the body in close as Bochniak is trying to angle around him. Leg kick from Dawodu and Bochniak counters with a right. Another leg kick from Bochniak. Nice duck under to a double leg from Bochniak, Dawodu is back up but Bochniak is on him and driving him into the fence with a body lock. Dawodu is able to force a separation. They circle away the final few seconds.

Tilting buckets are very versatile and when used in the right application like ditching or finish grading. They are typically used with wide buckets from grading and shaping applications.

This controller, the company says, works with Rain Bird’s TBOS latching solenoid, and a direct rain sensor connection accommodates the Rain Bird RSD rain sensor for enhanced water efficiency.

– As you are removing the linkage and bolts, notice the way they are mounted so as not to reinstall something incorrectly. Once removed, lay out all of the parts and take inventory of them.

The 1530S and 2230S scissor skid lift attachments from Skid-Lift, Fargo, N.D., allow work crews to work up to 28 ft. in the air with a 15- to 22-ft. platform height and 12.5-sq.-ft. working deck. The base legs of the attachment are adjustable and allow professionals to work on all surfaces, including rough or uneven terrain, the company says. Both models have end and side access doors and one side attach plate. Lift capacity rating for both attachments is 700 lbs.

The company says the stump puller is also compatible with Solesbee’s quick coupler, and they offer a two-year warranty on all products.

Best Meal: House-Made Stracciatella with Mighty Vine Tomatoes, Croutons, Shallots, Sherry Vinegar, Basil

The 671 DIG-R-TACH® Series 16 earth drilling attachment from General Equipment Co., Owatonna, Minn., can be used with smaller hydraulic systems. The attachment features a two-speed chain/sprocket drive and a 5- to 20-gpm hydraulic flow range. A complete line of earth augers up to 36 in. in diameter is available with Pengo®-type, cast-steel boring heads and forged teeth for maximum digging performance.

There were some good returns here. You could see the “Attitude” being phased out as the wrestling boom was on the decline. WWE has not since managed to reach the buzz & excitement it generated in these years. It could be considered the point before the fall, and I’m intrigued to find out if any of the later Rumbles come close to matching what they did in the late 90’s/early 2000’s.